Singlemode LSZH Jacket Fiber Optic Patch Cord Simplex / Duplex FC /
UPC
FC optical fiber cords are widely used in fiber optic systems;
especially FC single mode products are very popular. FC standard
fiber optic connectors are used for telecommunications, CATV, LAN,
MAN, WAN, Test & Measurement, Industry, Medical and Sensors. They
are well known for general, average applications. We supply single
mode and multimode version FC fiber jumper cables and FC fiber
optic components.
The single-mode optical fiber with low water peak used in the patch
cords is compliant with ITU-T G.652.D standard. It provides full
compatibility and ability to perform quality splices with existing
fiber-optic networks. The average attenuation of the fiber is about
0.4 dB/km for 1310 nm, and 0.25 dB/km for 1550 nm. The optical
fiber is reinforced by aramid fibers (Kevlar) and covered with PVC
sheath.
The optical fibers compliant with ITU-T G.652.D are now among the
best standard single-mode fibers on the market. Before introduction
of the G.652.D recommendations, optical systems could use one of
the three transmission windows with lower attenuation (I: 850 nm,
II: 1310 nm, III: 1550 nm). Systems based on optical fibers with
low water peak can work in the whole band from 1280 nm to 1650 nm.
Features
Meets Telcordia GR-326 Core and ROHS requirements.
The connector could be SC,FC,LC,ST,MU, MTRJ ,E2000 etc.
The cable could be G652D,G655,G657,OM1,OM2,OM3 etc.
The cable size could be 1,6*3.3, 2.0*4.1,2.8*5.7
Application: Fiber CATV, Fiber Cabling system, LAN,FTTH
Clean and Scratch-Free End Face
Proportional geometric test is applied to the normal production.
100% interferometer check is available under special requirement.
Optical Specification
| Connector | SC,FC,LC,ST,MU,E2000,MTRJ | MPO/MTP |
| Polishing | SM/UPC | MM/PC | SM/APC | SM/PC | MM/PC |
| Insertion Loss(max) | ≤0.30dB | ≤0.30dB | ≤0.30dB | ≤0.75dB | ≤0.5dB |
| Return Loss(min) | ≥50 dB | ≥35 dB | ≥60 dB | ≥40dB | ≥20dB |
| Tensile Strength | <10kg |
| Durability | <0.20 dB typical change, 500 matings |
| Repeatability | ≤0.1dB |
| Storage /Operating Temperature (°C) | -40~+85 |
Geometric Specification
| | PC End-face | APC End-face |
| Radius of Curvature | SC/FC/ST | 10~25 mm | 5~12 mm |
| LC/MU | 7~25 mm | 5~15 mm |
| Apex Offset | ≤50 um |
| Fiber Spherical Height | +/- 50 nm |
| Angular Offset | ------ | 8°± 0.2° |
Fiber Optic Patch Cord, Optical Fiber Patch Cord, Fiber Optic
Assemblies, Fiber Jumpers
